Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HELP: SUP32 and WS-X6182-2PA


My switch keeps telling me that the software image for WS-X6182-2PA is not bundled in the image.

What does this mean and what can I do about it?

New Member

Re: HELP: SUP32 and WS-X6182-2PA

What are you running for the IOS on the switch?

Below is the minimum required IOS for the 65xx/76xx

Minimum Software Release

Cisco IOS® Software Release 12.1(8)E

New Member

Re: HELP: SUP32 and WS-X6182-2PA

I have just installed:


its still telling me that there are issues. the card is staying powered down

New Member

Re: HELP: SUP32 and WS-X6182-2PA

Supervisor Engine 32 Restrictions

•Supervisor Engine 32 requires a high-capacity fan tray (see the "Fan Trays" section).

•In some chassis, Supervisor Engine 32 requires a high-capacity power supply (see the "Power Supplies" section).

•Supervisor Engine 32 does not support this hardware:

-WS-F6K-PFC3A Policy Feature Card 3A (PFC3A)

-WS-F6K-PFC3BXL Policy Feature Card 3BXL (PFC3BXL)

-DFCs (installed DFCs do not power up with a Supervisor Engine 32)

-Switch Fabric Modules

-These switching modules:

-WS-X6704-10GE 4-port 10-Gigabit Ethernet XENPAK

-WS-X6748-SFP 48-port Gigabit Ethernet SFP

-WS-X6724-SFP 24-port Gigabit Ethernet SFP

-WS-X6816-GBIC 16-port Gigabit Ethernet GBIC

-WS-X6748-GE-TX 48-port 10/100/1000 RJ-45

-7600-SIP-600 SPA Interface Processor-600

-Optical Services Modules (OSMs)

-WS-X6182-2PA FlexWAN Module (the WS-X6582-2PA Enhanced FlexWAN Module is supported)

-CISCO7603 3-slot chassis

That is from this link

So sorry i guess it is not supported.

CreatePlease login to create content