Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

help with Out of band

I have a 2821 router with Version 12.4(21) can't get the dial up to work

here is the config

Async0/1/0                 unassigned      YES NVRAM  down                  down

line 0/1/0
session-timeout 10
password
modem InOut
modem autoconfigure discovery
transport input ssh
stopbits 1
speed 115200
flowcontrol hardware

Phone line test good

1 REPLY
Hall of Fame Super Silver

Re: help with Out of band

Hello Jfeo,

how have you configured the async line?

post sh run int interface async0/1/0

you will need dialer in-band and the dialer string and you need to prepare the chat script to pilot the modem

see

http://www.cisco.com/en/US/docs/ios/dial/configuration/guide/dia_modem_chat_scpts_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp998461

Hope to help

Giuseppe

141
Views
0
Helpful
1
Replies
CreatePlease to create content