Help with Route Tracking a backup route terminating a VPN on 2 asa's
here is my scenario, i have remote sites (192.168.242.0)/24 terminating a vpn tunnel to an asa w/ an ip of 192.168.1.203 and a second asa at ip 192.168.1.254 that acts as a backup vpn termination point if the line on the first one goes down.
Our Core router which is 192.168.1.1 will hold the tracking routes that say if the 192.168.242.0 /24 subnet can't be reached at ASA 192.168.1.203 to look to ASA2 at 192.168.1.254
i am lookign for all the commands to put on the core router having to due with tracking, i would like the router to ping the ip 192.168.242.1 which is the remote sites router for the change of about 10 seconds before it switches over.
thanks and i will attach my diagram in case my wordage is sloppy
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.