Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Help with set ip next-hop recursive

I don't understand the  concept of the set ip next-hop  recursive under a route map.  Any help will be very appreciated

3 REPLIES
VIP Super Bronze

Re: Help with set ip next-hop recursive

Hi Luis,

This command is mostly used when you are deploying PBR.

The set ip next-hop command verifies the existence of the next hop specified, and…

  • if the next hop exists in the routing table, then the command policy routes the packet to the next hop.

  • if the next hop does not exist in the routing table, the command uses the normal routing table to forward the packet.

Have a look at this document for more info:

http://www.cisco.com/en/US/tech/tk364/technologies_configuration_example09186a00801f3b54.shtml#casetwo

HTH

Reza

New Member

Re: Help with set ip next-hop recursive

Thanks a lot.

New Member

Re: Help with set ip next-hop recursive

hello,

i have wrote a blog for this title yesterday , seem will help you to understand.

http://blog.sina.com.cn/s/blog_6479d7c50100k07k.html

5035
Views
0
Helpful
3
Replies