Hi - I'm using a parent policy-map to shape traffic for a child policy-map that assigns different traffic classes bandwidth percentages.
All the examples I've seen use class-default in the parent policy-map, but my concern is that if I do this then ALL traffic including management, routing updates etc. will be shaped, when it is only 4 specific traffic types I want to be shaped.
If I specify another class, that matches the same 4 classes as the child policy-map as opposed to using class-default as shown as possible alternative solution at the bottom, would that shape only the internet services and queue everything else as normal without including it in the shaping?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...