Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

High CPU in 7600

In one of 7606 router we have 86% CPU usage.

Below is summary

CPU utilization for five seconds: 85%/83%; one minute: 85%; five minutes: 85%

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process

63 11380 2841 4005 0.47% 0.13% 0.06% 1 SSH Process

191 6299376 24538237 256 0.15% 0.14% 0.19% 0 IP Input

227 58448 8455 6912 0.47% 0.08% 0.10% 2 SSH Process

275 2316092 9088831 254 0.07% 0.08% 0.08% 0 CEF: IPv4 proces

291 13100592 3202421 4090 0.31% 0.17% 0.18% 0 HIDDEN VLAN Proc

My question there is no individual process is eating the cpu but it is showing 86%.

Any suggestion.

Thanks,

Ehsan

1 REPLY
Super Bronze

Re: High CPU in 7600

What the stats show is a processor very busy forwarding traffic. Which sup is the box? Any fabric, fabric cards and/or cards with DFCs? Any idea of the overall bandwidth being pushed? (W/o DFCs, even a sup720 or rsp720 is rated at about 15 or 30 Mpps.)

124
Views
0
Helpful
1
Replies
CreatePlease to create content