Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

High CPU (IP Input) on 3620

Hello,

Receiving high CPU bursts (rising to 80% at a time) due to high IP Input (after performing sh proc cpu) for example:

31 4032252 2192903 1838 24.82% 16.58% 17.43% 0 IP Input

The router has a single 3750 switch stack and 2 WAN links out, none of which are passing any large amount of traffic (10m link using c.5-10% util; 2m link using c.1%;100m LAN using c.1%).

Question is, what can be causing these frequent but intermittent high CPU bursts? There is only one OSPF area configured, but not running CEF.

Any advice would be appreciated.

thanks

Phil

2 REPLIES

Re: High CPU (IP Input) on 3620

Hi,

Have a look at the following URLs which might be helpful to diagnose.

Troubleshooting High Cpu utilisation in IP Input.

http://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a00801c2af3.shtml#req

Performance Tuning Basics.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a7306.shtml

-VJ

New Member

Re: High CPU (IP Input) on 3620

Thanks - I've added cef for now to see if this has an impact.

281
Views
4
Helpful
2
Replies
CreatePlease login to create content