Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

high cpu,policy

I have a 7206VXR (NPE-G1) router as interface with the mpls network. I am doing policy in this router ( shaping+wfq+pq).

The remote sites are about 300 with BW of 2 Mbps each one.

I applied de policy in a Gi inteface of de 7200.

The cpu is always high with traffic ( not processing).

Is there any other way to applide policing in this topology, so that la consumer of cpu were not to high.

Thanks.

Marcelo

1 REPLY
Silver

Re: high cpu,policy

By default policy-routing is process-switched, so to enable this to be fast-switched you must add the following command to the fa0/0 interface:

- ip route-cache policy

For more info on this please see the following URL :

http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfindep.html

98
Views
0
Helpful
1
Replies