Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

high cpu since 12.4

hi,

i have a 7206 g1 router in which we installed:

disk2:c7200-js-mz.124-13a.bin

since that time the cpu util is about 10-15 percent higher than before.

if i do a "sh proc cp sort" there is always "IP SLA Mon Event" one of the top.

i removed all SAA/SLA Pings - and responder - but even then i always see

"IP SLA Mon Event" on the top

CPU utilization for five seconds: 30%/27%; one minute: 34%; five minutes: 31%

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process

209 15756 69889523 0 0.49% 0.47% 0.49% 0 IP SLA Mon Event

62 1315408 11058146 118 0.32% 0.40% 0.34% 0 IP Input

225 310516 3315917 93 0.24% 0.15% 0.14% 0 BGP Router

mplsrbgope01#

mplsrbgope01#sh run | in SLA

mplsrbgope01#sh run | in sla

mplsrbgope01#sh run | in respond

mplsrbgope01#

any idea

3 REPLIES
Bronze

Re: high cpu since 12.4

Hi,

This could be a problem with CEF.

That is packects gets process swithced rather than CEF/Fast swithced.

Do you get any messages in you log ?

Try : c7200-js-mz.124-13b.bin 256/48

BR,

Bjornarsb

New Member

Re: high cpu since 12.4

hi,

thanks for answer, but:

why do you mean its a problem with cef?

cef is enabled.

in my opinion it is strange that always "IP SLA" is on top - and i removed all config from that process!

i mean 35 to 45 % of cpu is not really bad, but it is very strange that it is in fact 10 to 15% higerh than before the upgrade to 12.4.

and the second thing is that i always have the "IP SLA" entry in the cpu list although i have no config of that.

the only log entry:

Jun 3 08:39:05.824: %FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walker (0.0.0.1/0). -Traceback= 0x60635014 0x6146AC74 0x60B80BF4 0x60B811D4 0x60F0E15C 0x60F11E0C 0x60F02FC4 0x60F2B948 0x607324E0 0x607324C4

Jun 3 08:39:13.480: %FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walker (0.0.0.1/0). -Traceback= 0x60635014 0x6146AC74 0x60B80BF4 0x60B811D4 0x60F0E15C 0x60F11E0C 0x60F02FC4 0x60F2B948 0x607324E0 0x607324C4

Bronze

Re: high cpu since 12.4

Hi,

The reason why this could be CEF is that

there is some known bugs related to CEF ,

packets require more CPU if their not CEF switched. So try bug toolkit on CCO or create a TAC case.

HTH,

BR,

Bjornarsb

363
Views
2
Helpful
3
Replies