Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

High cpu utilization with RIP Router

Dear All,

I have one 7507 router and 6509 Switch which are running on OSPF and RIP. These days i'm observing high cpu utilzation on these devices. when i check the "show proc cpu sorted" RIP Router is showing 3-4%. My doubt is whether RIP updates will have that much impact on the cpu utilization.

3 REPLIES
New Member

Re: High cpu utilization with RIP Router

Hi

Have you read this info before it has some useful links

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a70f2.shtml

Hope that helps

New Member

Re: High cpu utilization with RIP Router

Hi

The problem i'm facing is due to high ip input and rip router.i would like to know whether rip updtes will have impact on the utilizations...just have a look at this attachement

Re: High cpu utilization with RIP Router

Hi

Usually high input problem can be nullified by enabling CEF on the routers.

Is it possible for you to configure IP CEF in global mode and check for any change or difference in the CPU utilisation ??

regds

338
Views
0
Helpful
3
Replies