08-14-2013 11:28 AM - edited 03-04-2019 08:45 PM
I know I've got old hardware but I'm learning.
I am having trouble, since I'm a newb, getting my 871 to serve up IPs to my home network.
The 871 is connected to my modem via the WAN port.
I also need to set the IP range from 192.168.1.50-150 as I have static IPs without those ranges.
Ben
Solved! Go to Solution.
08-14-2013 07:15 PM
Hi Ben,
Config VLAN 1 with your 192.168.x.x/24 as the gateway for your LAN. Config NAT to translate 192.168.x.x to your WAN interface IP. Configure DHCP if you have host need dynamic IP. That's all you need to make it work.
HTH,
Lei Tian
Sent from Cisco Technical Support iPhone App
08-14-2013 07:15 PM
Hi Ben,
Config VLAN 1 with your 192.168.x.x/24 as the gateway for your LAN. Config NAT to translate 192.168.x.x to your WAN interface IP. Configure DHCP if you have host need dynamic IP. That's all you need to make it work.
HTH,
Lei Tian
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide