Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Home Network 871

I know I've got old hardware but I'm learning.

I am having trouble, since I'm a newb, getting my 871 to serve up IPs to my home network.

The 871 is connected to my modem via the WAN port.

I also need to set the IP range from 192.168.1.50-150 as I have static IPs without those ranges.

Ben                   

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Home Network 871

Hi Ben,

Config VLAN 1 with your 192.168.x.x/24 as the gateway for your LAN. Config NAT to translate 192.168.x.x to your WAN interface IP. Configure DHCP if you have host need dynamic IP. That's all you need to make it work.
HTH,
Lei Tian

Sent from Cisco Technical Support iPhone App

1 REPLY
Cisco Employee

Re: Home Network 871

Hi Ben,

Config VLAN 1 with your 192.168.x.x/24 as the gateway for your LAN. Config NAT to translate 192.168.x.x to your WAN interface IP. Configure DHCP if you have host need dynamic IP. That's all you need to make it work.
HTH,
Lei Tian

Sent from Cisco Technical Support iPhone App

146
Views
0
Helpful
1
Replies
CreatePlease to create content