Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Host on the switch pings but not the switch itself.

I just moved a stack of 1900s last night from one 6509 to another as part of a core redesign.

So there were 3 stacks that were moved. One is flaky, host on the switches ping but switch IP addresses won't. Each stacks are redundantly connected to two 6509s using GLBP. I do not see an obvious difference on configuration with the flaky stack and the working stacks.

I broke the redundancy on the switch stack and the switches started pinging except for the first switch on the stack.

Does anyone have any idea?

2 REPLIES
New Member

Re: Host on the switch pings but not the switch itself.

Is this switch in the same VLAN? Check the switch config.

New Member

Re: Host on the switch pings but not the switch itself.

no vlans. ports are routed

117
Views
0
Helpful
2
Replies