06-21-2014 08:51 AM - edited 03-04-2019 11:11 PM
Hi I have bought a used 877 modem/router.
I am trying to configure it as I am a newbie. I have tried many different configuration but now I have some doubts if the modem really works. The first thing I need to know is if it can make the adsl synching... I need of some configuration or just to plug the rf11 in the router ?
a "sh dsl interface atm0" says the modem is down. The CD led is blinking.
How can I check if the adsl signal is synched ?
06-21-2014 09:14 AM
Hello
Have been be provided with any details regarding your ADSL connection from you isp
PPPoA/PPPoE settings -Would you know what mode your xDSL connection is? As this will define the configuration required on your router
res
paul
06-21-2014 10:14 AM
Hi Paul,
thank you for your reply.
Well, in my supermarket-modem I see
ADSL2+
annex_a
it's an 8 mega adsl
pcv 8/36, atm qos ubr pcr 0,
dynamic ip, encapsulation 1483 bridged ip llc,
mtu 1492,
I dont see any clue about pppoa or pppoe.
googling looking for other infos about my provider (fastweb in italy) I found those:
Modulation: G.992.1 Annex A (G.dmt)
Latency: Fast
Multiplexing: LLC-based
encapsulation: Bridged (RFC-1483/RFC-2684)
Data Channel
VPI: 8
VCI: 36
Traffic Class: UBR
Thank you again for your help..
06-21-2014 03:01 PM
If I type "sh dsl int"
it says the modem is down,
dsl mode = unknown
and
Line has not yet been activated
My question is: can the configuration make problems to the dsl synching ?
or the dsl synching is something that it is or it is not ??
06-21-2014 04:48 PM
I want add an other info. The firmware is 12.4.15.t7 and the modem firmware version is 3.0.14.
Maybe I need to upgrade ? to what version ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: