Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

how can i configure DSL dialer on cisco

how can i configure DSL dialer on cisco

3 REPLIES

Re: how can i configure DSL dialer on cisco

Here's an example. Please rate if it helps.

interface FastEthernet0/1

description DSL WAN Interface

no ip address

no ip redirects

no ip unreachables

no ip proxy-arp

no ip mroute-cache

duplex auto

speed auto

pppoe enable

pppoe-client dial-pool-number 1

!

interface Dialer1

description DSL WAN Dialer$FW_OUTSIDE$

ip address negotiated

no ip unreachables

ip nat outside

ip virtual-reassembly

encapsulation ppp

no ip mroute-cache

dialer pool 1

dialer-group 1

no cdp enable

ppp authentication pap callin

ppp pap sent-username CORP@xxx.sbcglobal.net password 0 SeCrEt

dialer-list 1 protocol ip permit

New Member

Re: how can i configure DSL dialer on cisco

Thanks for the reply. this is very use full but i want to know one more thing if i want to use cisco pppoe with third party CPE with no DSL module in the router. how can i configure then.

thanks in advance

Re: how can i configure DSL dialer on cisco

This configuration does not use a DSL module. The Dialer0 interface is logical. The DSL modem still provides the termination to the DSL, but the logical Dialer Interface does the rest.

HTH and please rate.

372
Views
0
Helpful
3
Replies
CreatePlease to create content