cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
431
Views
0
Helpful
1
Replies

How configurate a AS5400XM for dial-in dial-out in interface serial PRI with E1 signaling R2?

willyskate
Level 1
Level 1

Hi partners,

I  have one problem, i need programing a AS5400XM with interfaces PRI and  signaling R2, how i cant enable the interfaces for dial-in and dial-out  in this equipment, please somebody cant helpme.

------------------ show version ------------------

Cisco Internetwork Operating System Software

IOS (tm) 5400 Software (C5400-IS-M), Version 12.3(15), RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Tue 24-May-05 19:22 by ssearch

Image text-base: 0x60008AFC, data-base: 0x61700000

ROM: System Bootstrap, Version 12.2(2r)XB, RELEASE SOFTWARE (fc1)

BOOTLDR: Cisco IOS Software, 5400 Software (C5400-BOOT-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)

Router uptime is 18 minutes

System returned to ROM by power-on

System image file is "flash:c5400-is-mz.123-15.bin"

cisco AS5400HPX (R7K) processor (revision T) with 262144K/65536K bytes of memory.

Processor board ID JAE0617007K

R7000 CPU at 390MHz, Implementation 39, Rev 3.3, 256KB L2, 8192KB L3 Cache

Last reset from power-on

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

Primary Rate ISDN software, Version 1.1.

Manufacture Cookie Info:

EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x31,

Board Hardware Version 16.6, Item Number 800-16091-01,

Board Revision B0, Serial Number JAE0617007K,

PLD/ISP Version 2.2,  Manufacture Date 23-Apr-2002.

Processor 0x14, MAC Address 0x0943450C4

Backplane HW Revision 1.0, Flash Type 3.3V

2 FastEthernet/IEEE 802.3 interface(s)

10 Serial network interface(s)

492 terminal line(s)

16 Channelized E1/PRI port(s)

512K bytes of non-volatile configuration memory.

65536K bytes of processor board System flash (Read/Write)

8192K bytes of processor board Boot flash (Read/Write)

Configuration register is 0x2102

best regards.....

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

You can search cisco.com for document and examples.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: