I need help trying to add this command to a 2811. Can someone tell me what the command is to add it to startup-config?
interface ATM1/0
description 26HCGJxxxxxx
no ip address
ip nbar protocol-discovery
no atm ilmi-keepalive
no scrambling-payload
!
interface ATM1/0.36 point-to-point
description DATA traffic to xxxx Street
bandwidth 1382
ip address 10.xxx.xxx.xxx 255.255.255.252
ip nbar protocol-
pvc 1/36
vbr-rt 1382 1382 1
tx-ring-limit 3
service-policy output Voice
!
!
interface ATM1/1
no ip address
shutdown
no atm ilmi-keepalive
no scrambling-payload
!
interface ATM1/2
no ip address
shutdown
no atm ilmi-keepalive
no scrambling-payload
!
interface ATM1/3
no ip address
shutdown
no atm ilmi-keepalive
no scrambling-payload
