10-02-2009 04:47 AM - edited 03-04-2019 06:13 AM
I have a couple 6500s in production. Is there a way I can tell from "show vers", "show mod", or something whether the chassis is an "E" chassis?
Thanks!
Solved! Go to Solution.
10-02-2009 04:54 AM
Hello Michael,
try sh inventory it should be in first line:
sh inventory
NAME: "WS-C6509-E", DESCR: "Cisco Systems Catalyst 6500 9-slot Chassis System"
PID: WS-C6509-E , VID: V04, SN: SMG1129N3GY
NAME: "WS-C6K-VTT-E 1", DESCR: "VTT-E FRU 1"
PID: WS-C6K-VTT-E , VID: , SN: SMT1124A017
NAME: "WS-C6K-VTT-E 2", DESCR: "VTT-E FRU 2"
PID: WS-C6K-VTT-E , VID: , SN: SMT1124A011
NAME: "WS-C6K-VTT-E 3", DESCR: "VTT-E FRU 3"
PID: WS-C6K-VTT-E , VID: , SN: SMT1123C304
NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1"
PID: CLK-7600 , VID: , SN: SMT1108C572
or
sh ver | inc WS
cisco WS-C6509-E (R7000) processor (revision 1.4) with 458720K/65536K bytes of memory.
hope to help
Giuseppe
10-02-2009 04:54 AM
Hello Michael,
try sh inventory it should be in first line:
sh inventory
NAME: "WS-C6509-E", DESCR: "Cisco Systems Catalyst 6500 9-slot Chassis System"
PID: WS-C6509-E , VID: V04, SN: SMG1129N3GY
NAME: "WS-C6K-VTT-E 1", DESCR: "VTT-E FRU 1"
PID: WS-C6K-VTT-E , VID: , SN: SMT1124A017
NAME: "WS-C6K-VTT-E 2", DESCR: "VTT-E FRU 2"
PID: WS-C6K-VTT-E , VID: , SN: SMT1124A011
NAME: "WS-C6K-VTT-E 3", DESCR: "VTT-E FRU 3"
PID: WS-C6K-VTT-E , VID: , SN: SMT1123C304
NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1"
PID: CLK-7600 , VID: , SN: SMT1108C572
or
sh ver | inc WS
cisco WS-C6509-E (R7000) processor (revision 1.4) with 458720K/65536K bytes of memory.
hope to help
Giuseppe
10-02-2009 04:59 AM
show idprom backplane
HTH,
__
Edison.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: