How GLBP will learn if wan link is down but ether net is up
I want to configure the glbp on two routers to load balancing on WAN link, We have 100 mb link, each terminated on cisco 2951 with ethernet o/p from service providers Mux. Since ethernet will be always up how glbp will learn the wan link is down & forward the traffic to another router...
Re: How GLBP will learn if wan link is down but ether net is up
If this is in your WAN and you have devices capable of routing on each side it would be more supportable to use a dynamic routing protocol such as RIP, EIGRP or OSPF instead of static routes based on IP SLA.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...