Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how Intervlan routing works?

what is intervlan routing??How the intervlan routing works??How to configure??

can anyone explain me with the diagram.

1 ACCEPTED SOLUTION

Accepted Solutions

how Intervlan routing works?

Hi,

IEEE 802.1Q is the networking standard that supports Virtual LANs (VLANs) on an Ethernet network. The standard defines a system of VLAN tagging for Ethernet frames and the accompanying procedures to be used by bridges and switches in handling such frames.

Regarding Native vlan concept, see the below thred in which I have explained about it.
https://supportforums.cisco.com/thread/2081815?stqc=true


Hope the above clear and understand you.
Please rate all the helpfull posts.
Regards,
Naidu.

4 REPLIES
Cisco Employee

how Intervlan routing works?

I would recomend you to first read following document to understand what is InterVlan routing:

http://www.cisco.com/en/US/docs/switches/lan/catalyst5000/hybrid/routing.html#wp13354

Then you will need first of all for yourself to understand why you need it, what are the platofrms involved in it, what is the network diagram. Then you can use the same document or the one for your specific platform to configure that.

Hope this helps,

Nik

how Intervlan routing works?

Hi Dinesh,

Inter vlan routing means if you want to communicate two different vlan in networks you have to configure intervlan routing .normally it required layer 3 switch or router .it is essential in the big networks and big companies .In big network we can see lot of vlan if you want to communicate different vlans we are using
Example

Vlan : account
Vlan : sales

If you want to communicate the sales vlan to account vlan in network you have to configure the intervlan routing
The command which used to enable in the inter vlan is
go to the global configuration mode

Switch # config t
Switch(config)#ip routing


The network devices in different VLANs cannot communicate with one another without a router to forward traffic between the VLANs. In most network environments, the VLANs are associated with individual networks or subnetworks.

For example, in an IP network, each subnetwork is mapped to an individual VLAN. In an IPX network, each VLAN is mapped to an IPX network number. Configuring the VLANs helps to control the size of the broadcast domain and keeps the local traffic local. When an end station in one VLAN needs to communicate with an end station in another VLAN,

interVLAN communication is required. This communication is provided by interVLA

Please see the below link for how you can configure and better understand.
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/routing.pdf


Hope the above clear and understand you.
Please rate all the helpfull posts.
Regards,
Naidu.

New Member

how Intervlan routing works?

What is Encapsulation dot1Q?

how it is works?

what is the use of these protocols?

what is Native vlan??what is the use of Native vlan??

how Intervlan routing works?

Hi,

IEEE 802.1Q is the networking standard that supports Virtual LANs (VLANs) on an Ethernet network. The standard defines a system of VLAN tagging for Ethernet frames and the accompanying procedures to be used by bridges and switches in handling such frames.

Regarding Native vlan concept, see the below thred in which I have explained about it.
https://supportforums.cisco.com/thread/2081815?stqc=true


Hope the above clear and understand you.
Please rate all the helpfull posts.
Regards,
Naidu.

3083
Views
0
Helpful
4
Replies
CreatePlease login to create content