Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how is the mos factor or r-factor calculated

hi,

my question is how i can calculate the mos value.

is there a directly correspondence between icpif and mos?

or is the correspondence between the r-factor and mos ?

here is a output of the routers sla agent:

MPLSRBGORTR01#sh ip sla monitor collection-statistics 20192001

Entry number: 20192001

Start Time Index: 09:36:00.952 MES Mon Aug 21 2006

Number of successful operations: 16

Number of operations over threshold: 0

Number of failed operations due to a Disconnect: 0

Number of failed operations due to a Timeout: 0

Number of failed operations due to a Busy: 0

Number of failed operations due to a No Connection: 0

Number of failed operations due to an Internal Error: 0

Number of failed operations due to a Sequence Error: 0

Number of failed operations due to a Verify Error: 0

Voice Scores:

MinOfICPIF: 11 MaxOfICPIF: 11 MinOfMOS: 4.06 MaxOfMOS: 4.06

RTT Values (milliseconds):

NumOfRTT: 16000 RTTAvg: 4 RTTMin: 2 RTTMax: 26

RTTSum: 67593 RTTSum2: 304199

Packet Loss Values:

PacketLossSD: 0 PacketLossDS: 0

PacketOutOfSequence: 0 PacketMIA: 0 PacketLateArrival: 0

InternalError: 0 Busies: 0 PacketSkipped: 0

Jitter Values (milliseconds):

MinOfPositivesSD: 1 MaxOfPositivesSD: 21

NumOfPositivesSD: 1528 SumOfPositivesSD: 3389 Sum2PositivesSD: 11883

MinOfNegativesSD: 1 MaxOfNegativesSD: 16

NumOfNegativesSD: 1516 SumOfNegativesSD: 3369 Sum2NegativesSD: 11631

MinOfPositivesDS: 1 MaxOfPositivesDS: 4

NumOfPositivesDS: 1201 SumOfPositivesDS: 1532 Sum2PositivesDS: 2352

MinOfNegativesDS: 1 MaxOfNegativesDS: 4

NumOfNegativesDS: 1190 SumOfNegativesDS: 1531 Sum2NegativesDS: 2383

Jitter Avg: 1 JitterSD Avg: 2 JitterDS Avg: 1

Interarrival jitterout: 0 Interarrival jitterin: 0

One Way Values (milliseconds):

NumOfOW: 16000

OWMinSD: 1 OWMaxSD: 23 OWSumSD: 34811 OWSum2SD: 92619

OWMinDS: 1 OWMaxDS: 6 OWSumDS: 32782 OWSum2DS: 69572

OWAvgSD: 2 OWAvgDS: 2

Start Time Index: 08:36:00.948 MES Mon Aug 21 2006

Number of successful operations: 30

Number of operations over threshold: 0

Number of failed operations due to a Disconnect: 0

Number of failed operations due to a Timeout: 0

Number of failed operations due to a Busy: 0

Number of failed operations due to a No Connection: 0

Number of failed operations due to an Internal Error: 0

Number of failed operations due to a Sequence Error: 0

Number of failed operations due to a Verify Error: 0

Voice Scores:

MinOfICPIF: 11 MaxOfICPIF: 11 MinOfMOS: 4.06 MaxOfMOS: 4.06

RTT Values (milliseconds):

NumOfRTT: 30000 RTTAvg: 4 RTTMin: 2 RTTMax: 25

RTTSum: 126600 RTTSum2: 565324

Packet Loss Values:

PacketLossSD: 0 PacketLossDS: 0

PacketOutOfSequence: 0 PacketMIA: 0 PacketLateArrival: 0

InternalError: 0 Busies: 0 PacketSkipped: 0

Jitter Values (milliseconds):

MinOfPositivesSD: 1 MaxOfPositivesSD: 22

NumOfPositivesSD: 2654 SumOfPositivesSD: 5749 Sum2PositivesSD: 18535

MinOfNegativesSD: 1 MaxOfNegativesSD: 20

NumOfNegativesSD: 2651 SumOfNegativesSD: 5736 Sum2NegativesSD: 18328

MinOfPositivesDS: 1 MaxOfPositivesDS: 5

NumOfPositivesDS: 5133 SumOfPositivesDS: 5601 Sum2PositivesDS: 6867

MinOfNegativesDS: 1 MaxOfNegativesDS: 7

NumOfNegativesDS: 5151 SumOfNegativesDS: 5599 Sum2NegativesDS: 6815

Jitter Avg: 1 JitterSD Avg: 2 JitterDS Avg: 1

Interarrival jitterout: 0 Interarrival jitterin: 0

One Way Values (milliseconds):

NumOfOW: 30000

OWMinSD: 0 OWMaxSD: 23 OWSumSD: 52523 OWSum2SD: 118923

OWMinDS: 1 OWMaxDS: 12 OWSumDS: 74077 OWSum2DS: 193055

OWAvgSD: 1 OWAvgDS: 2

thanks for answer

2 REPLIES
Blue

Re: how is the mos factor or r-factor calculated

with IOS 12.3(14)T and higher use this command to get MOS and ICIPF scores:

show ip sla monitor collection-statistics (as you've used above); view the output as shown below: (excerpt from your output)

Voice Scores:

MinOfICPIF: 11 MaxOfICPIF: 11 MinOfMOS: 4.06 MaxOfMOS: 4.06

(any value of zero means that score was not generated; your MOS score for this is 4.06)

ICPIF corresponds to the score as set by the dialPeer that sent the call. (cisco specific i believe; calculatedPlanningImpairmentFactor)

MOS corresponds to the industry standard of voice quality measurement at the destination end and is expressed as a number from 1 (lowestQuality) to 5 (highestQuality)

you could say that there is correspondence between R-factor and MOS, but not R-factor and ICPIF.

New Member

Re: how is the mos factor or r-factor calculated

ok, thanks f answer - sounds logical, but:

if you say my mos corresponds to r-factor - can i calculate the r-factor from the output above?

(sh ip sla collection-stat)

or are the parameters to get the r-factor not in the output

(only for interrest)

589
Views
0
Helpful
2
Replies
CreatePlease login to create content