Folks, imagine I want to test track object command as shown below between two routers. Do I normally need more than two routers in order to simulate the below?
ip access-list extended 165
5 permit icmp host x host y
rtr 1
type echo protocol ipicmpecho x
rtr schedule 1 life forever start-time now
track 123 rtr 1 reachability
ip route x 255.255.255.255 vlan 1 permanent
interface FastEthernet0/0
standby 2 track 123 decrement 20
!
interface FastEthernet0/1
standby 2 track 123 decrement 20