Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to change telnet password from the Network Assistant?

We have Cisco 4503 switch. We can login it using Cisco Network Assistant. But can't login it using telnet. It prompts for the password. No one knows the password. How can we change the telnet password, perhaps enable password too from the Network Assistant?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Have you configured Telnet

Have you configured Telnet access on the vty lines on the 4503?

 

http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-121-mainline/46960-config-telnet.html

 

 

New Member

Hello Chicagotech,Tim is

Hello Chicagotech,

Tim is correct. Verify if you have telnet enable on you Cisco 4503 switch. If you implement the following command in Exec mode, that should provide assistance for you. 

switch# show users

 

Additional Resources:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_2_1_1/security/configuration/guide/b_Cisco_Nexus_1000V_Security_Configuration_Guide_2_1_1/b_Cisco_Nexus_1000V_Security_Configuration_Guide_2_1_1_chapter_01000.html

 

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_nx-os-cfg/sec_ssh.html#wp1083227

 

Regards,

Jordan Tazewell

 

 

2 REPLIES
Cisco Employee

Have you configured Telnet

Have you configured Telnet access on the vty lines on the 4503?

 

http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-121-mainline/46960-config-telnet.html

 

 

New Member

Hello Chicagotech,Tim is

Hello Chicagotech,

Tim is correct. Verify if you have telnet enable on you Cisco 4503 switch. If you implement the following command in Exec mode, that should provide assistance for you. 

switch# show users

 

Additional Resources:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_2_1_1/security/configuration/guide/b_Cisco_Nexus_1000V_Security_Configuration_Guide_2_1_1/b_Cisco_Nexus_1000V_Security_Configuration_Guide_2_1_1_chapter_01000.html

 

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_nx-os-cfg/sec_ssh.html#wp1083227

 

Regards,

Jordan Tazewell

 

 

376
Views
0
Helpful
2
Replies
CreatePlease to create content