08-21-2007 02:17 AM - edited 03-03-2019 06:24 PM
Hi all,
We need check if the packets leaving our 3750 in a specific port are actually marked with EF. But we can't use a sniffer. Any idea? I've been trying some "sh mls qos" but the outputs don't show anything...
thanks in advance,
Solved! Go to Solution.
08-21-2007 02:26 AM
Can you try
sh mls qos interface
sh mls qos interface statictics.
These commands should tell you whether DSCP is being set correctly
HTH
Narayan
please rate all posts
08-21-2007 02:26 AM
Can you try
sh mls qos interface
sh mls qos interface statictics.
These commands should tell you whether DSCP is being set correctly
HTH
Narayan
please rate all posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide