Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to check DSCP field without phuysical access

Hi all,

We need check if the packets leaving our 3750 in a specific port are actually marked with EF. But we can't use a sniffer. Any idea? I've been trying some "sh mls qos" but the outputs don't show anything...

thanks in advance,

1 ACCEPTED SOLUTION

Accepted Solutions

Re: How to check DSCP field without phuysical access

Can you try

sh mls qos interface statistics or

sh mls qos interface statictics.

These commands should tell you whether DSCP is being set correctly

HTH

Narayan

please rate all posts

1 REPLY

Re: How to check DSCP field without phuysical access

Can you try

sh mls qos interface statistics or

sh mls qos interface statictics.

These commands should tell you whether DSCP is being set correctly

HTH

Narayan

please rate all posts

99
Views
0
Helpful
1
Replies