Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to check flash memory in switch

Hi,

I have Cisco 3560 switch. I need to check the flash memory and NVRAM memory. How can i find the information. I'm able to find in show version command but bit confusing, please help me.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: how to check flash memory in switch

Command to check flash memory = dir flash:

Command to check nvram = dir nvram:

Hope this helps.

3 REPLIES

Re: how to check flash memory in switch

Hi Mohan,

You can check it simply with this command:

show file systems

To find more details about this command with 3560

Please refer to the following link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swiosfs.html#wp1257201

Wish this be helpful

Hall of Fame Super Gold

Re: how to check flash memory in switch

Command to check flash memory = dir flash:

Command to check nvram = dir nvram:

Hope this helps.

New Member

Re: how to check flash memory in switch

I used the interrupted mode to reset the password of 2950x switch. But after the complete process when I check for sir flash in privilege mode, the reply I get is, Error: loading this flash. But when I reload the flash is intializing in the booting process. Please refer me to some solution.

18241
Views
0
Helpful
3
Replies
CreatePlease to create content