Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to check route memory for 3GE Linecard

Hi Guys,

i wanna check the route memory of my 3GE linecard, when i do show diags command i only see the packet memory tx/rx.

tia.

jeff

4 REPLIES
Cisco Employee

Re: How to check route memory for 3GE Linecard

Hi Jeff,

You must use the show mem on the LC (attach to it first or use exec slot X sh mem command)

HTH

Laurent.

New Member

Re: How to check route memory for 3GE Linecard

Hi Laurent,

I think i found it on the sh diags command, im not certain though. is it the processor memory ?

#sh diags 3 | include Mem

Processor Memory: MEM-GRP/LC-128=

Packet Memory: MEM-PKT-512-UPG=

Processor Memory size: 134217728 bytes

TX Packet Memory size: 268435456 bytes, Packet Memory pagesize: 16384 bytes

RX Packet Memory size: 268435456 bytes, Packet Memory pagesize: 16384 bytes

Cisco Employee

Re: How to check route memory for 3GE Linecard

Yes this is the all memory available on your LC.

Processor Memory size is used to store routing information (FIB and adj tables)

TX/RX packet memories are used to forward packets.

You can notice

TX+RX memory size = 512MB

Processor Memory size = 128MB

More information on the following links:

http://www.cisco.com/en/US/products/hw/routers/ps167/products_tech_note09186a00801e1dbe.shtml

Laurent.

New Member

Re: How to check route memory for 3GE Linecard

Hi Laurent,

Thanks for this info, somehow the 3GE LC worked after increasing the RouteMemory. It doesnt work on 128MB, it needs 256MB.

Also does my gsr support the 10GE LC? what is the difference between the Engine 2 and 3 on LC?

Thanks.

jeff

128
Views
0
Helpful
4
Replies
CreatePlease login to create content