Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to check switch port uptime its urgent.

I have 4510 cisco switch. One of the switch port was down last nigt for few time and now its up. So my customer is asking me how long it is up. i mean its up time how long. How can i get this information with out syslog server.

5 REPLIES
New Member

Re: How to check switch port uptime its urgent.

How about "sh ver"

Re: How to check switch port uptime its urgent.

take a look at switch log, if it has not been flushed you will be able to see when it went down and when it came up.

HTH

Sam

wuh
New Member

Re: How to check switch port uptime its urgent.

Use snmp walker.

Cisco Employee

Re: How to check switch port uptime its urgent.

You can use show version or snmpwalk of the MIB Object sysUpTime.

However, keep in mind that that sysUpTime is a 32 bit counter and will wrap after 497 days and start over again at 0.

New Member

You can do a show int link

You can do a show int link command and see the port is up. Logs will show when the port transitioned to up. The interface link command is best used to show how long a port has been down.

 

4437
Views
10
Helpful
5
Replies