02-09-2010 02:39 PM - edited 03-04-2019 07:27 AM
Is it possible to configure 2 NATs and have them used based on the destination port of the packets?
I'm currently trying to do this with a Cisco 881.
I can see that I can create 2 access-lists based on source and destination IP, but there is no option for source or destination port:
access-list 1 permit 192.168.2.0 0.0.0.255
To explain further, we currently have 2 WAN connections:
We're using a Linux machine to route based on destination port. Anything for HTTP or HTTPS goes via the cheap DSL connection and everything else goes via the fiber connection.
02-11-2010 03:49 AM
Can you post out a detailed diagram of your requirement with dummy ip schema attached to it?
regds
02-11-2010 04:43 PM
I'm attaching a diagram showing everything I'm trying to achieve.
I've also included the second network (on the right) that needs a site-to-site VPN between the two routers.
What I need to know at this point if all this is possible and what devices are best before I actually purchase anything.
Thanks very much
02-12-2010 06:32 AM
Hi,
not sure if I've got your point, but wouldn't using an extended ACL instead of a standard ACL help?
BR,
Milan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: