Re: How to configure a leased line and an ADSL on 1751 or 1841
I think there is a missing component from your description of the network. Behind the 1751 is there some sort of firewall or other network device handling your internal IPs?
The issue I see with this is that if your IP on your FastE interface is a public routable IP from your current ISP, you would have issues routing it over a backup connection. Also if you have any sort of DNS based on those public IPs for something like a mail server it may not work on your backup connection.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...