Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

How to configure NTP on Firewall and Switch

Hi,

i have two asa firewall in LAN based active/standby failover and two 4507r switch in HSRP.

I want to configure the NTP to syn these network devices with my NTP server.

PLease suggest..

Thank You

Chetan

1 REPLY
New Member

Re: How to configure NTP on Firewall and Switch

Hi,

have a look at the info provided here:

http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_basic_sys_manage.html

In global config mode, you need to specify the ip address of the internal or external Time server

Router(config)# ntp server 192.168.13.57

661
Views
0
Helpful
1
Replies
CreatePlease to create content