Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to configure PPPoE with Bell in Montreal

Hello,

I have asked Bell to help me configure my 2851 router to connect to the Internet via their DSL modem with PPPoE, and the refer me to Cisco.

So does anyone knows how to configure a router to connect to Internet via a DSL modem from Bell with PPPoE.

Thank you.

1 REPLY
Hall of Fame Super Gold

Re: How to configure PPPoE with Bell in Montreal

Hi,

Please reference this document:

http://cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093fbf.shtml

It is written for the 1700 but will work for any router. Ignore the "6400" part.

Note, certain commands are not needed with IOS newer than 12.2(13)T

Since you are using quite a sophisticated router, you can also look in getting a WIC-1ADSL card that will let you connect directly to the ADSL line, eliminating the ISP-provided modem.

Hope this helps, please rate post if it does!

961
Views
0
Helpful
1
Replies
CreatePlease login to create content