Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to configure snmp traps for rate-limit exceedance

Hi,

does anybody know if an ios router can send traps if interface level rate-limit thresholds are exceeded?

Many thanks in advance,

Thorsten

3 REPLIES
Hall of Fame Super Bronze

Re: How to configure snmp traps for rate-limit exceedance

New Member

Re: How to configure snmp traps for rate-limit exceedance

Because of your recommendation I assume that the normal snmp agent does not include support for the rate-limit feature (like the normal "snmp-server enable traps " commands).

Do you perhaps know where I can find the OIDs or variable names for the below shown conformed and exceeded packet and byte counter so that we can monitor them with our nms?

===

router#sh int gi0/1 rate-limit

GigabitEthernet0/1

Input

matches: access-group 110

params: 3000000 bps, 10000 limit, 10000 extended limit

conformed 5965M packets, 394170M bytes; action: transmit

exceeded 48678137 packets, 3191M bytes; action: drop

last packet: 4ms ago, current burst: 60 bytes

last cleared 1y24w ago, conformed 68000 bps, exceeded 0 bps

matches: access-group 111

params: 200000 bps, 4470 limit, 4470 extended limit

conformed 2600780 packets, 304394096 bytes; action: transmit

exceeded 1545 packets, 206378 bytes; action: drop

last packet: 512417216ms ago, current burst: 0 bytes

last cleared 1y24w ago, conformed 0 bps, exceeded 0 bps

===

Regards,

Thorsten

Hall of Fame Super Bronze

Re: How to configure snmp traps for rate-limit exceedance

I suggest searching in the IOS MIB Locator

http://tools.cisco.com/ITDIT/MIBS/servlet/index

I also suggest reposting in the Network Management forum

Regards

Edison.

1444
Views
0
Helpful
3
Replies