Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to configure vlans and trunk on ASR903 ethernet module

hi all,

 

I have two ASR903 routers, each with ethernet module. i  want to configure vlans on each ethernet module of ASR 903 and want to configure trunk between two ASR 903. i want to configure following.

 

1. port G0/0/0 and G0/0/1 of both ASR 903 assigned to vlan 10

2. port G0/0/2 and G0/0/3 of both ASR 903 assigned to vlan 20

3. port 0/0/7 of both ASR903 are connected to each other and configured as trunk (both vlan 10 and 20 allowed)

how to write the  EVC and EFP configuration in order to acheive this. Thanks

 

 

Best Regards

 

73
Views
0
Helpful
0
Replies