Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to connect two office for two cisco 2911

Hello

We have two different location for two offices

Office 1    =

Office 2

they are connected by Micro-Wave , Radio , and we have two cisco 2911 routers so we like to connect this two offices

Office 1 Microwav-radio  ip address ==    155.155.155.1

Local Network  =====                              10.10.10.x

Office 2   Microwave-radio ip adddress ==  155.155.155.2

Local Network 1   =                                  192.168.1.0

Local Network 2  =                                    192.168.2.0

so please i can configure interfaces , but i have little bit confuse for the Routing and the access list , so how office 1 can access the two local networks office 2

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

How to connect two office for two cisco 2911

Office 1:

IP ROUTE 192.168.1.0 255.255.255.0 155.155.155.1

IP ROUTE 192.168.2.0 255.255.255.0 155.155.155.1

Office 2:

IP ROUTE 10.10.10.0 255.255.255.0 155.155.155.2

That should do it

2 REPLIES
New Member

How to connect two office for two cisco 2911

Office 1:

IP ROUTE 192.168.1.0 255.255.255.0 155.155.155.1

IP ROUTE 192.168.2.0 255.255.255.0 155.155.155.1

Office 2:

IP ROUTE 10.10.10.0 255.255.255.0 155.155.155.2

That should do it

New Member

How to connect two office for two cisco 2911

thanks jose this works for me

838
Views
0
Helpful
2
Replies
CreatePlease login to create content