Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

how to create a frame relay connection on an E1

Hi,

Using a 7206VXR router and I need to configure an Frame Relay connection on an E1. I need to use timeslot 25 on controller e1 1/0.

Can someone help me with commands to create interface as well subinterface?

Thanks a mill.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: how to create a frame relay connection on an E1

Brad,

when you say you want to use timeslot 25, does it mean you want to configure a FR for just 64K

Here's a sample anyway for a Fr connection of 128K using timeslot 25 & 26

controller e1 1/0

channel-group 0 timeslots 25-26

interface serial 1/0:0

encapsulation frame-relay ietf

frame-relay lmi-type ansi

interface serial 1/0:0.1 point-to-point

ip address x.x.x.x y.y.y.y

frame-relay interface-dlci 100

HTH, rate if it does

Narayan

4 REPLIES

Re: how to create a frame relay connection on an E1

Brad,

when you say you want to use timeslot 25, does it mean you want to configure a FR for just 64K

Here's a sample anyway for a Fr connection of 128K using timeslot 25 & 26

controller e1 1/0

channel-group 0 timeslots 25-26

interface serial 1/0:0

encapsulation frame-relay ietf

frame-relay lmi-type ansi

interface serial 1/0:0.1 point-to-point

ip address x.x.x.x y.y.y.y

frame-relay interface-dlci 100

HTH, rate if it does

Narayan

Community Member

Re: how to create a frame relay connection on an E1

jsut for 64k

Hall of Fame Super Gold

Re: how to create a frame relay connection on an E1

Royalblues has given you the example for two timeslots, showing you how the timeslots parameter works.

It would have been more appropriate to try from his indication and rate his posts, rather than ask again for a negligible configuration difference.

Community Member

Re: how to create a frame relay connection on an E1

i will indeed rate his post. i was merely answering is question. Royalblues has ALWAYS been EXTREMELY helpful.

Royalblues - I THANK YOU MY GOOD MAN! :)

Bevilaquea - My apologies if i have offended you. I was in a rush when i responded to his post.

101
Views
1
Helpful
4
Replies
CreatePlease to create content