If deployment case comes all depends on the current DC setup ,how is the DC is build i mean to say redundancy fashion or not. so that we can plan for DR site setup also in same fashion like in redundancy mode same as if like DC setup.
Deployment also comes how you design your DC/DR setup in Active/Active or Active/Passive so in these cases full flow needs to be known with ip subnetting and traffic redirection all those stuff.
Then comes the connectivity between DC and DR is via MPLS,LL or some other means,Genrally these type of documents are confendial and are specfic to customer for whom these type of document has been made.
Any way if i get some docs related to these requirement i wil let you know.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...