Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to Disable %CELLWAN-2-MODEM_DOWN logs ?

Router : 1841

IOS : c1841-advipservicesk9-mz.124-15.T7.bin

I'm continuously getting %CELLWAN-2-MODEM_ logs, although it doesn't seem to connectivity issue because as soon as any traffic is injected via cellular interface these logs stop occurring.

Let me know how to disable these logs

The logs & cellular interface configs are as follows

Router#sh log | i %CELLWAN

Aug 26 11:20:48.595 CEST: %CELLWAN-2-MODEM_DOWN: Cellular0/1/0 modem is DOWN

Aug 26 11:21:06.409 CEST: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP

Aug 26 11:23:30.544 CEST: %CELLWAN-2-MODEM_DOWN: Cellular0/1/0 modem is DOWN

Aug 26 11:23:44.606 CEST: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP

Aug 26 11:26:36.962 CEST: %CELLWAN-2-MODEM_DOWN: Cellular0/1/0 modem is DOWN

Aug 26 11:26:50.633 CEST: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP

Aug 26 15:57:42.983 CEST: %CELLWAN-2-MODEM_DOWN: Cellular0/1/0 modem is DOWN

Aug 26 15:58:00.810 CEST: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP

Aug 26 16:00:24.925 CEST: %CELLWAN-2-MODEM_DOWN: Cellular0/1/0 modem is DOWN

Aug 26 16:00:38.559 CEST: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP

Aug 26 16:03:06.962 CEST: %CELLWAN-2-MODEM_DOWN: Cellular0/1/0 modem is DOWN

Aug 26 16:03:20.540 CEST: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP

Aug 26 16:05:48.819 CEST: %CELLWAN-2-MODEM_DOWN: Cellular0/1/0 modem is DOWN

Aug 26 16:06:02.466 CEST: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP

Aug 26 16:08:30.760 CEST: %CELLWAN-2-MODEM_DOWN: Cellular0/1/0 modem is DOWN

Aug 26 16:08:44.391 CEST: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP

Aug 26 16:11:12.701 CEST: %CELLWAN-2-MODEM_DOWN: Cellular0/1/0 modem is DOWN

Aug 26 16:11:26.380 CEST: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP

Router#

Router#sh run int ce0/1/0

Building configuration...

Current configuration : 456 bytes

!

interface Cellular0/1/0

description XXXXXXXXX

bandwidth 384

ip address negotiated

ip access-group IPSEC in

ip access-group IPSEC out

encapsulation ppp

load-interval 30

dialer in-band

dialer string gsm

dialer-group 1

async mode interactive

ppp chap hostname XXXXX

ppp chap password 7 XXXXXXX

ppp pap sent-username XXXXX password 7 XXXXXX

end

Router#


Let me know if any more details required

Everyone's tags (2)
2 REPLIES

How to Disable %CELLWAN-2-MODEM_DOWN logs ?

I don't have access to cell cards, but under the cell interface see if you can add "no logging event link-status" and see if it helps.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
New Member

How to Disable %CELLWAN-2-MODEM_DOWN logs ?

Hello John,

Thanks for your reply however i guess "no logging event link-status" will disable all the logs related to Cellular0/1/0 interface. I want to disable or find the root cause of the logs "%CELLWAN-2-MODEM_"

There doesn't seem to be any issue with the configuration or Router IOS as a similar other site router with same configs and router IOS is working fine

540
Views
0
Helpful
2
Replies
CreatePlease to create content