Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to enable onePK on CSR1000V?

I am running:

Cisco IOS XE Software, Version 03.11.01.S - Standard Support Release

Cisco IOS Software, CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S1, RELEASE SOFTWARE (fc2)

using license:

License Level: premium

License Type: Evaluation License

Next reload license Level: premium

Index 24 Feature: prem_eval

        Period left: 8  weeks 3  days

        License Type: Evaluation

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Low

The onePK status shows:

CSR#sh onep status

Status: enabled

Version: 1.1.0

Transport: tcp; Status: disabled

Transport: tls; Status: disabled

Transport: tipc; Status: running; Port: 15003

Session Max Limit: 10

CPU Interval: 0 seconds

CPU Falling Threshold: 0%

CPU Rising Threshold: 0%

History Buffer: Enabled

History Buffer Purge: Oldest

History Buffer Size: 32768 bytes

History Syslog: Disabled

History Archived Session: 0

History Max Archive: 16

Service Set: Base               State: Enabled     Version 1.1.0

Service Set: Vty                State: Disabled    Version 0.1.0

Service Set: OneFW              State: Disabled    Version 0.1.0

Service Set: Mediatrace         State: Disabled    Version 1.0.0

I would like to enable Transport: tcp, but I dont know how to.

The transport command is not recognized:



% Unrecognized command


ONEP configuration commands:

  cpu      CPU resource

  default  Set a command to its defaults

  exit     Exit from ONEP configuration mode

  history  One Platform History Trails

  no       Negate a command or set its defaults

  service  ONEP service set

  session  One Platform Session

What else could I try? Am I missing something?


Everyone's tags (4)
Cisco Employee

OnePK is supported from

OnePK is supported from version 3.12.0 onwards