Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

how to enable VPN between these router and allow through PIX?

Hi All,

how to enable VPN between these router and allow through PIX?

Site I : T1

Router Cisco 1721

Firewall CISCO PIX 506e

Site II : T1

Cisco 1721

Firewall PIX506e

Site III: Bonded T1

Router :CISCO 12651

Firewall: Cisco PIX 515r

Thank you,

Siva

1 REPLY
Cisco Employee

Re: how to enable VPN between these router and allow through PIX

Hi Siva,

If you want to build the IPSec tunnels from your routers and not from the FW, you need NAT-T feature. Also your FW should allow UDP on port 4500 from the outside in addition to allow it from the inside.

It would be easier to build your tunnels between the FW

The following link gives you plenty of examples:

http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html

HTH

Laurent.

103
Views
5
Helpful
1
Replies
CreatePlease to create content