Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

How to get the AUSM firmware information with the serial number

I need to get a way to get the firmware information of an AUSM card with the card?s serial number. The problem is that the MGX 8850 doesn?t recognize the card, so i need to find this information in another way!!

2 REPLIES
Silver

Re: How to get the AUSM firmware information with the serial num

Use the dspcd command to view hardware and firmware information about the selected PXM.

http://www.cisco.com/univercd/cc/td/doc/product/wanbu/bpx8600/pnni_ses/rel1_0/softw/orcgapb2.pdf

New Member

Re: How to get the AUSM firmware information with the serial num

Hi Ronald -

the AUSM is passive in that the firmware is automatically downloaded from the PXM card.

Just issue the "dspfwrevs" command on the active PXM and it will show you which firmware versions are installed in the "C:FW" directory.

rgds

Joern Pasche

SwitchXchange, Inc.

jpasche@switchxchange.com

97
Views
0
Helpful
2
Replies
CreatePlease to create content