Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to limit traffic or packets on cmts(ubr7246vxr)

Is there any command or procedure where we can put on cmts( ubr 7246vxr) link coming from netwrk serice provider which established a thrshold on the traffic on that link and generate a trap or log ?

would cable downstream rate limit acheive that..

Thnk u so much in advance

1 REPLY
Hall of Fame Super Silver

Re: how to limit traffic or packets on cmts(ubr7246vxr)

Hello Chandra,

may be the following can be useful subscriber traffic management

http://www.cisco.com/en/US/docs/cable/cmts/feature/ubsubmon.html#wp1108326

Edit:

I see you are interested on traffic from network service provider.

I think you can manage the interface with the usual SNMP MIB counters for inoctets outcotets

the command you mention is meant towards cable modems in downstream direction I think:

see

http://www.cisco.com/en/US/docs/ios/cable/command/reference/cbl_03_cable_d.html#wp1060182

Hope to help

Giuseppe

121
Views
0
Helpful
1
Replies