Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

How to load ballance cache engines via WCCP V2?

Can someone point me to a document (or explain) that explains how to load balance cache engines via WCCP? I have found documentation that states there are basically three ways to do it...but does not provide the means on how to configure this. Very frustrating. Thanks.

Bill

3 REPLIES
New Member

Re: How to load ballance cache engines via WCCP V2?

Hi Bill,

Can you send me the links you are talking about ?

I would like to know how we can load balanc WCCP using Cache Engines.In our network we are using a L3 router to load balance internet traffic. And we have this L3 router configured as default gateway on the Cache Engine, as I know Cache Engine cannot have two default gateways configured and is not L3 aware

Thanks,

Praful

New Member

Re: How to load ballance cache engines via WCCP V2?

Sure...but it's not very helpful. Look under load distribution. I have a case open with TAC...but they are not much help yet...

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a00800da707.html#wp1000972

New Member

Re: How to load ballance cache engines via WCCP V2?

Bverdon,

Did you ever find out how load balancing is done with wccp with multiple cache engines? I am asking as I am working on trying to setup wccp to work with more than 1 cache engine within our LAN and I do not see specific information on how WCCP is configured for multiple cache engins

129
Views
0
Helpful
3
Replies
CreatePlease to create content