cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
880
Views
0
Helpful
17
Replies

How to make a commoun VLAN ??

reagentom
Level 1
Level 1

Dear All;

I have Cisco Catalyst Switch 4006 with Supervisor II OS with 4232-L3 routing module, witch is configured for 5 VLANS, each VLAN cann't communicate with others.

I want to make VLAN 5 as a common VLAN so it can communicate with all others VLANS.

Attached is a copy of my show running-config on the routing blade

Please Help

Thanks

17 Replies 17

is the gigabit subinfterface for vlan 5 is up then?

which port is your laptop attached to?

please give us the copy of show vlan in the switching module, and show interface gigabitEthernet3.5

because last time the 'line protocol' of gigabitethernet3.5 is still down, line protocol status indicate that there is 'something' wrong with layer 2.

this could be the vlan assignments in switching module, or the configuration between switching module and the routing module.

rgrds

Dear Handoko,

attached is required show vlans

Thanks

hai,

just searching my old doc's

and find this useful links

http://www.cisco.com/en/US/partner/products/hw/switches/ps663/products_configuration_example09186a0080157f51.shtml

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/inst_nts/78_10164.htm

http://www.cisco.com/en/US/partner/products/hw/switches/ps663/products_tech_note09186a0080094959.shtml

i allready see the file "show vlan.txt", status of vlan 5 in switching module is active,

but i don't know whether the status of interface gigabitethernet3.5 is up or down

let's cek those 3 links first, maybe we missed some step.

rgds,

handoko

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco