Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to map RMAC to Real MAC Address in end station

How to map RMAC to Real MAC Address in end station

CIP-Slot1#llc badns

pcep=0085 rmac=0068.e83a.219f lmac=4000.7206.1111 rsap=04 lsap=04 this=81F609D8

rif=0810.1F91.BB81.3E80.0000.0000.0000.0000.0000 ack-len=0000

This Command running on cisco 7200

End station is IBM mainframe

2 REPLIES
Hall of Fame Super Silver

Re: How to map RMAC to Real MAC Address in end station

Hello Worapun,

when going through a SR/TLB (Source Route Translational) Bridge between an ethernet segment and a token ring segment the order of bits inside each octet is reversed.

If this is the case the OUI

0068e8 that doesn't have a match in OUI page has to be read

00 = 00

68 = 01101000 rollover = 16

e8 = 11101000 rollover = 17

or it can be the result of an administrative settings

see

http://www.cisco.com/en/US/docs/ios/bridging/configuration/guide/br_remote_srb_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1002863

you can find information about conversion between llc2 TR and ethernet frames.

Hope to help

Giuseppe

New Member

Re: How to map RMAC to Real MAC Address in end station

Thank you Giuseppe

138
Views
5
Helpful
2
Replies
CreatePlease login to create content