Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

how to redistribute ibgp route to igp protocol.

ibgp CAN'T inject route in eigrp or ospf,how can do it.think's

router eigrp 100

log-adjacency-changes

redistribute bgp 1 metric 100 1 255 1 1500

network 154.100.1.0 0.0.0.255

network 154.255.255.0 0.0.0.255

no auto-summary

!

router bgp 1

no synchronization

bgp log-neighbor-changes

neighbor 154.2.1.252 remote-as 1

neighbor 154.2.1.252 next-hop-self

no auto-summary

!

4 REPLIES
Hall of Fame Super Gold

Re: how to redistribute ibgp route to igp protocol.

rusong

From the command reference:

bgp redistribute-internal

To allow the redistribution of iBGP routes into an interior gateway protocol such as IS-IS or OSPF, use the bgp redistribute-internal command in router configuration mode. To remove the bgp redistribute-internal command from the configuration file and restore the system to its default condition where the software does not allow the redistribution of iBGP routes into Interior Gateway Protocols (IGPs), use the no form of this command.

HTH

Rick

Community Member

Re: how to redistribute ibgp route to igp protocol.

think/s.I find it in high ios ver.

Re: how to redistribute ibgp route to igp protocol.

Hi Rusong,

The command support was introduced in 12.1. i dont think you would be running a code lower than that.

see link for more details

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hirp_r/rte_bgh1.htm#wp1072295

HTH

Narayan

Hall of Fame Super Bronze

Re: how to redistribute ibgp route to igp protocol.

Rusong,

The command should be under the BGP process, not the EIGRP process. Perhaps that's the reason you are unable to enter such command in your config.

_____

HTH,

124
Views
0
Helpful
4
Replies
CreatePlease to create content