Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

how to remoce clock rate

I have 2851 router with this IOS VERSION ((C2800NM-ADVIPSERVICESK9-M), Version 12.4(9)T1, ) and the clock rate 2000000 is on the serial interface by default,im try to remove it but it's not going,i dit no clock rate and no clock rate 2000000 on the interface but it is still there.

4 REPLIES
Hall of Fame Super Silver

Re: how to remoce clock rate

Hello Selome,

what to do depends on your target:

if you want the serial interface to accept a clock from line use

clock source line

if you want to configure a different rate

use

clock rate

Hope to help

Giuseppe

New Member

Re: how to remoce clock rate

my problem i want to remove it on the inteface,i dont wanna see any clock rate on the interface at all.

Hall of Fame Super Gold

Re: how to remoce clock rate

Please send show controller for the interface in question.

Re: how to remoce clock rate

Try plugging the DTE cable on that router port and CSU (power on). It may go away.

152
Views
0
Helpful
4
Replies
CreatePlease to create content