Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to remove a frame relay mapping to ip address 0.0.0.0

Hi,

I took the CCIE R&S exam a few days ago and a question was to statically define frame relay mapping between two routers.

The problem was that there was multiple maps to ip 0.0.0.0 on a Serial interface and I didn't know how to remove its. Of course, to have the points for that question, you were supposed to remove those mappings...

If anyone knows from where it comes and what is the way to remove it.

Regards,

--

Pierre-Louis Gingembre

5 REPLIES
Silver

Re: How to remove a frame relay mapping to ip address 0.0.0.0

Bonjour Pierre

I am just curious as to whether you tried the command "no frame map ip 0.0.0.0" and if so did this not work?

I am studying for my CCNP at present so the frame relay configurations I have worked with may not be as complex as that for CCIE. But that is how I would have attempted to remove these frame map statements.

Best Regards,

Michael

New Member

Re: How to remove a frame relay mapping to ip address 0.0.0.0

Hello Michael,

As you can imagine, that was the first thing I have tried to do, but the result was : %no frame relay maps for 0.0.0.0.

Thanks for your reply.

--

Pierre-Louis

Hall of Fame Super Bronze

Re: How to remove a frame relay mapping to ip address 0.0.0.0

Issue

no frame-relay inverse-arp on the serial interface and reboot the router.

HTH,

__

Edison.

New Member

Re: How to remove a frame relay mapping to ip address 0.0.0.0

Hello HTH,

Thanks for your answer...

I'll try this as soon as possible.

--

Pierre-Louis

New Member

Re: How to remove a frame relay mapping to ip address 0.0.0.0

hi,

since there do not have only one router are connected via frame-relay switch, maybe "no frame-relay inverse-arp & no arp frame-relay" are needed.

regards

dongdong

371
Views
0
Helpful
5
Replies
CreatePlease login to create content