Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to setup async HWIC16A for 2800 series router

i bought one 2811 router, HWIC 16A card, 2set octal cable and 16 modems (56K analog modem. i'll be using these set for modem pooling. do you have a documentation/configuration guide for these implementation. need help. thank you.

1 REPLY
New Member

Re: how to setup async HWIC16A for 2800 series router

Hi,

you need to configure the

for link 1

==========

ip host NAME_R01 2001 IP_Address_A.B.C.D - for configuring the first cable of the Octal cable.

Simillarly for line 2

ip host NAME_R02 2002 IP_Address_A.B.C.D - for configuring the second cable of the Octal cable.

Please also check the mentioned URL this may help you to configure.

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml

2297
Views
0
Helpful
1
Replies
CreatePlease login to create content