Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to setup Cisco 890 true webinterface

Hi,

I have a Cisco 890 Router. But I lost the setup CD/DVD to configure my Cisco 890. Can somebody tell me
how I can access the webinterface or setup from this router. Or can I somewhere download the software?

Thx

  • WAN Routing and Switching
1 ACCEPTED SOLUTION

Accepted Solutions

Hi

Hi

On that picture you are the privileged exec mode, now you can configure the router executing configure terminal

81 REPLIES

Hi

Hi

Please check this link, basically it is the configuration used on the devices, now if you are going to use the local credentials created on the device you need to configure:

ip http authentication local

The Access-list can be optional.

http://www.cisco.com/c/en/us/td/docs/ios/12_2/configfun/configuration/guide/ffun_c/fcf005.html

Also I was reading you need at least this image installed on your device:

15.2(4)M2
or
15.3(1)T

Hope it is useful

:-)

New Member

Hi,

Hi,

I can access the interface via IP but it asks for username and password. These I don't know anymore. I already reset the router. Is there
any dafault username and password?

Kind Regards

Wesley

VIP Purple

Hello,

Hello,

try:

Username: Admin

Password: none (that means empty)

or

Username: cisco

Password: cisco

or

Username: Cisco

Password: Cisco

New Member

Hi,

Hi,

doesn't work :(

I get this:

The server 192.168.1.100 is asking for your user name and password. The server reports that it is from level_15 or view_access

VIP Purple

Hello,

Hello,

try 'username1' for both username and password...

New Member

Hi,

Hi,

no luck. Strange. Reset and still nothing

Type: cisco892w-agn-p-k9

VIP Purple

Hello,

Hello,

try:

username1

password1

This is a one time username and password and needs to be changed after logging in...

New Member

Hello,

Hello,

also nothing. I dont know what could be the problem here with this router....

VIP Purple

How do you reset the router ?

How do you reset the router ? With the reset button at the back ?

Unplug the router, push and hold the reset button while you plug the power cord back in. Continue holding the reset button for up to 30 seconds and let the router boot as normal.

2
Views
0
Helpful
81
Replies
This widget could not be displayed.